PRODUCT
- Refractory Brick
- Insulation Brick
- Monolithic Refractories
- New Tech Precast
- Graphite and SiC Products
- Refractory Raw Materials
- Metallurgical Materials
-
High Purity Magnesia
The special grade magnesite is lightly burned, finely ground, shaped, and finally sintered in an ultra-high temperature shaft kiln to form high-purity magnesia. The MgO content can be greater than 97.5%.
MORE > -
Light-burnt Magnesia Powder
Light-burnt magnesia powder is calcined by magnesite in a reflector kiln. The product has strong chemical properties and is the raw material to produce high-quality magnesia synthetic magnesia spinel sand.
MORE > -
Reactive α- Al2O3 Micropowder
Alpha alumina is activated alumina powder produced by using first-grade industrial alumina, aluminum hydroxide and additives.It is especially suitable for shaped products and unshaped refractory materials such as refractory castables, plastics, repair materials, gunning materials, smears, etc. It has a strong effect on improving the high temperature strength of refractory materials and improving the corrosion resistance of materials.
MORE > -
Fused Zirconia Mullite
Fused Zirconia Mullite is made by the fusion of high-quality zirconia sand and industry alumina powder in the electric arc furnace. Adding zirconium can improve the chemical resistance, heat shock resistance and reduce the expansion coefficient of mullite.
MORE > -
Fused Magnesia
Fused magnesia is a kind of high purity refractory material made from high quality light burning powder
MORE > -
Fused Spinel
Fused Al2O3-MgO Spinel is made from industrial alumina and high-purity CCM, melting in electric arc furnace. It has high bulk density, high mineral phase content, well-developed crystal grains, uniform structure and stable quality.
MORE > -
Graphite Powder
Graphite powder is soft and dark gray. In the absence of oxygen, its melting point is above 3000 ℃, and it is one of the most temperature-resistant minerals. The chemical properties of graphite powder are relatively stable at room temperature, and are insoluble in water, dilute acids, dilute alkalis and organic solvents. The material has high temperature resistance and conductivity, and can be used as refractory materials, conductive materials, and wear-resistant lubricating materials.
MORE >
-
Fused Silica
Fused Silica is made of high purity quartz sand by electrically fused in electric arc furnaces, then the crystalline quartz sand transformed into amorphous silicon dioxide.
MORE > -
Black /Green Silicon Carbide
Silicon carbide is made by high temperature smelting of raw materials such as quartz sand, petroleum coke (or coal coke), wood chips (salt is needed to produce green silicon carbide) in a resistance furnace. At present, silicon carbide is divided into black silicon carbide and green silicon carbide, both of which are hexagonal crystals, with a specific gravity of 3.20-3.25 and a microhardness of 2840-3320kg/mm2.
MORE > -
Calcined Bauxite
Calcined bauxite is produced by sintering high-alumina bauxite in rotary, round or shaft kilns at high temperatures. This process of calcining (heating) bauxite in kilns removes moisture and gives calcined bauxite its high alumina content.
MORE > -
White Fused Alumina
White fused alumina (WFA) is obtained from the fusion of high purity calcined alumina in electric arc furnaces. It is the main raw material for the production of medium and high-end shaped and unshaped refractory materials, and is also widely used in the manufacture of ceramics and resin abrasives And sandblasting, grinding and polishing, precision casting, special ceramics and other industries.
MORE > -
Brown Fused Alumina
Brown fused alumina is a brown aluminum oxide obtained from the reduction of high quality bauxite in an electric arc furnace at a temperature greater than 2000℃.It is crushed and shaped by an automatic grinder, deferrized by magnetic separation, and sieved into various particle sizes.
MORE >